Beitian BN-280 RS232 GPS Module GPS+GLONASS Dual Mode With Antenna
Tax included.
Description:
GPS+GLONASS dual mode, RS-232 level output, 9600, 1HZ output, standard NMEA-0183 protocol output.
The pins of the module are:
1.PPS, there is a second pulse output after positioning, the pulse period is 1s, and the high level lasts for 100ms, which is used for system synchronization.
2. GND, ground.
3.TX, RS-232 data output of the module.
4. RX, RS-232 data input of the module.
5.VCC, 3.6-5.5V, recommended 5.0V.
6. BOOT, please hang out during normal work.
Package included:
1 x Beitian BN-280 RS232 GPS Module
1 x cable
GPS+GLONASS dual mode, RS-232 level output, 9600, 1HZ output, standard NMEA-0183 protocol output.
| Parameter | Description | |
| Chip characteristics |
Chip | U-blox 8 |
| Receiving mode | GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS | |
| Frequency | GPSL1, GLONASS L1, BeiDou B1, SBAS L1, GalileoE1 | |
| Channel | 72 search channels | |
| Sensitivity |
Track | -167dBm |
| Recapture | -160dBm | |
| Cold start | -148dBm | |
| Hot start | -156dBm | |
| Precision |
Horizontal accuracy | 2.0 m CEP 2D RMS SBAS assist (open space) |
| Speed accuracy | 0.1m/s 95% (SA off) | |
| Time accuracy | 1us | |
| Start Time |
Cold start | 26s, The actual open sky is generally 38s average, directly related to the environment. |
| Warm start | 25s | |
| Hot Start | 1s | |
| Output Data |
Baud rate | 4800bps-115200bps,default 9600bps |
| Single GNSS | 1Hz-18Hz | |
| Standard GNSS | 1Hz-10Hz, default 1Hz | |
| Work limit |
Height | 50,000m maximum |
| Speed | 515m/s maximum | |
| Gravity acceleration | 4g maximum | |
| Power consumption | Voltage | DC 3.0V-5.5V, typical: 5.0V |
| Current | Normal 50mA@5.0V | |
| Physical parameter | Size | 28mm*28mm*8mm |
| Weight | 11.8 grams | |
| Surroundings | Operating temperature | -40 °C ~ +85 °C |
| storage temperature | -40°C ~ +85°C | |
| Connector | Connector | 1.25mm pitch 6pin socket |
| Indicator light | TX light | Power-on blue light flashes to indicate that there is data output. |
| PPS light | The light is not lit when it is not positioned. After 3D positioning, it starts to blink(red). | |
The pins of the module are:
1.PPS, there is a second pulse output after positioning, the pulse period is 1s, and the high level lasts for 100ms, which is used for system synchronization.
2. GND, ground.
3.TX, RS-232 data output of the module.
4. RX, RS-232 data input of the module.
5.VCC, 3.6-5.5V, recommended 5.0V.
6. BOOT, please hang out during normal work.
Package included:
1 x Beitian BN-280 RS232 GPS Module
1 x cable