2/4/6/8/10/12 Head Fogger Industrial Humidifier Ultrasonic Mist Maker 1.5M Wire Greenhouse Hydroponics Pool Landscape Mist Generator - 8 Heads

Description:

2/4/6/8/10/12 Head Fogger Industrial Humidifier Ultrasonic Mist Maker 1.5M Wire Greenhouse Hydroponics Pool Landscape Mist Generator

Specifications:

Features:

1. It is more adaptable to atomized water quality, and the same atomizer can work normally with pure water or tap water.
2. The power supply has a wide range of applications, which ensures that the product can still be used normally under large changes in the mains.
3. Equipped with power supply polarity protection circuit, which can prevent users from damaging the product due to reverse connection (not working when reverse connection).
4. Equipped with a start-up delay circuit to avoid damage to the circuit due to excessive start-up current.
5. The circuit of a single nozzle adopts an independent design and adopts an overcurrent protection circuit, which prevents the circuit of a nozzle from burning and damaging the power supply, and will not affect the normal operation of other nozzles.
6. The current of the whole machine is less affected by voltage and temperature. Because the current in each nozzle adopts electronic automatic adjustment, the current will decrease with the increase of temperature (will not affect the amount of fog), avoiding serious heat and current of the power tube The increase causes a vicious circle and damages the atomizer.
7. This product uses a metal shell with high thermal conductivity, strong corrosion resistance and good mechanical strength, which reduces the temperature difference between the inside of the host and the water, thereby extending the service life of the product.

Precautions for use:

1. When the atomizer is working normally, please do not put your hands on the spray cavity of the atomizer to prevent ultrasonic injury.
2. The atomizer must be in water to work normally, please put it in the water before turning on the power, and make sure that the surface of the atomizer is in a state of water to avoid damage to the atomizer.
3. When you stop using the atomizer, please disconnect the power first, and then take out the atomizer from the water.
4. When using this atomizer, please select a power supply with an output power greater than 250W and an output voltage of DC45±5V.
5. When multiple atomizers are used in the same container, they need to be equipped with separate power supplies. It is not possible to connect multiple atomizers with a single power supply for use, and pay attention to make the shells of each atomizer communicate with each other to prevent it from working. Electric corrosion.
6. The mist generated by the atomizer must be forcedly discharged by a fan, and each group of atomizers reserve a plane space of 350CM2 to avoid excessive water temperature and shorten the service life of the atomizer.
7. The atomizer is not suitable for atomizing corrosive liquids, so as not to damage the metal shell and atomizing film of the atomizer.
8. Please do not damage the water level sensor switch during the installation process, so as to avoid the failure of the water level switch and cause the atomizer to lose control. If the water level switch is damaged, stop using it, otherwise the atomizer will burn dry and further damage the atomizer. At this time, it can be used after being repaired by professional maintenance personnel.

Package Included:

More Details: