Geeetech 350W 12V 29A S-350-12 AC/DC Switching Power Supply With Wire For 3D Printer
Tax included.
Features:
Manual Switch between 110V and 240V Input
+ / - 10% adjustable output voltage
Auto on/off cooling fan
High Efficiency, Low Temperature
Built-in EMI Filter
100% full load burn-in test
Short Circuit,Over Load,Over Voltage and Over temp Protection
Auto-recovery after protection
1 x S-350-12 12V DC power supply box
1 x 60cm cable connected to ATX port
1 x 1m power supply cable with switch
Manual Switch between 110V and 240V Input
+ / - 10% adjustable output voltage
Auto on/off cooling fan
High Efficiency, Low Temperature
Built-in EMI Filter
100% full load burn-in test
Short Circuit,Over Load,Over Voltage and Over temp Protection
Auto-recovery after protection
| Specifications | |
| DC Output Voltage | 12VDC |
| Output Voltage Tolerance | ±1% |
| Output Current | 29A |
| Output Current Range | 0-29A |
| Output Power | 348W |
| Ripple And Noise | 150mVp-p |
| Input Voltage range | 90-132VAC/180-264VAC by switch 254~370VDC |
| Input Frequency range | 47-63HZ |
| Efficiency(Typ.) | 74% |
| Protection Overload | 105-135% rated output power |
| Protection Over Ovltage | 13.8-16.2V |
| Working temp. | -10-+60??Refer to output load derating curve) |
| Working humidity | 20~90% RH non-condersing |
| Storage temp.,humidity | -20-+85??10~95% RH |
| Vibration | 10-500HZ,2G 10 min./1cycle,60min.each along X,Y,Z axes |
| Size | 215 x 115 x 50 mm |
Note:
1.All paramaters NOT specially mentioned are measured at 230VAC input,rated load and 25??of ambient temperature.
2.Ripple & noise are measured at 20MHZ of bandwidth by using a 12' twisted pair-wire terminated with a 0.1uf & 47uf peralel capacitor.
3.Tolerance:indudes set up tolerance,line regulation and load regulation.
4.EU plug, will send the adapter together according to your country.
1 x S-350-12 12V DC power supply box
1 x 60cm cable connected to ATX port
1 x 1m power supply cable with switch
