Cart 0
30.5x30.5mm iFlight SucceX F4 TwinG Dual Tyro Flight Controller AIO OSD BEC Support SmartAudio for RC Drone FPV Racing

30.5x30.5mm iFlight SucceX F4 TwinG Dual Tyro Flight Controller AIO OSD BEC Support SmartAudio for RC Drone FPV Racing

  • Save R 2,407.56
Tax included.
SKU:
iFlight SucceX F4 TwinG Dual Tyro Flight Controller AIO OSD BEC Support SmartAudio for RC Drone 

Specification:
Brand Name: iFlight 
Model: SucceX F4 TwinG
Item Name: Dual Gyro F4 Flight Controller AIO OSD BEC
Input Voltage: 2-6S (5-36V)
MCU: STM32F405R6T6
IMU: Twins IC2689,Twins Gyros built-in (SPI)
OSD: AT7456E
Blackbox: Blackbox logging device
BEC: 5V@ 3A
Firmware: Betaflight/INAV
Target: STM32F405
FC: IFRC/IFF4_TWIN_G(STM32F405)
Size: 36x36mm
Mounting Hole: 30.5x30.5mm ( φ4mm with Grommets φ3mm)
Weight: 6.3g
- 5X Uarts (1 2 3 4 5) with build-in inversion
- 8X Dshot/Proshot/Oneshot output
- 8X individual ESC power/ signal pads
- 1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
- Smart audio & Tramp VTX protocol: Support (IRC Tramp)
- WS2812 led Strip: Suppor
- Beeper: Support
 
TwinG Gyro Setup
 
-The Betaflight target's default setting is ‘gyro_to_use = both’ / Gyro fusion is active!
 
-To check the current setting, please use CLI and type ‘get gyro’ to find the responding entry.
 
-Change the settings with ‘set gyro_to_use = ’ and type ‘save’.
 
-To get the most reliable performance or encounter noise, oscillation and bent props: Please use the default setting ‘both”. 
 
-For Single Gyro use, please use the debugging options to find and tune for the cleaner gyro, but lose the dynamic fusion and averaging.
 
-BF offers the following dual gyro debug options: dual_gyro_raw, dual_gyro, dual_gyro_diff, dual_gyro_combined.
 
-BlackboxLog explorer graph: dual_gyro_raw Debugging = [0] Roll Gyro1, [1] Pitch Gyro1, [2] Roll Gyro2, [3] Pitch Gyro2.
 
-The displayed graph will show the Gyro_Raw reading (no filters applied), both gyros can be compared.

Package Included: 
1x F4 Flight Controller Board
4x silicon grommets M4 to M3
1x 8P Cable