120W 6V 12V 80AH Motorcycle Auto Car Charger Pulse Repair For Lead Acid & Lithium Battery
Tax included.
Description:
1.There has strong fan,the speed can be 4500/min;
2.Stable performance,stopped automatic when charge full,pulse auto revive and maintenance battery;
3.Overheating protection:when the temperature of charger is over 105 ° C,the charger will stop working,when the temperature reduce to 80° C or turn off the power 10 minutes the charger can work again.Short circuit protection:when there has short circuit the charger stopped output and has a beep alert;
4.When the battery single cell voltage is lower than 1.5V the charger can’t start and has a beeb alert,avoid damage battery;
5.When the polarity of charger is adverse with battery,the charger will close automatic and has beeb alert.
Introduction of 5-stage mode
No-load mode: when there has no load connected with charger,the LED Screen will show voltage only,the power is about 2W.
Constant current: means the battery voltage is lower than the set voltage of charger,then the charger supply constant charging current to maintenance both battery and battery charger.
Constant Voltage: advanced pulse width modulation (PWM) technology,control the charger’s current and output voltage accurate,avoid overcharge.
Floating charge mode: when the battery is going to be charged full,the charger will stop charging,but still supply constant floating voltage and small current to battery.
Trickle charge mode: when the battery voltage and current is approaching the set voltage and current,it will turn to trickle floating charge from automatic mode,it means charge full,also can be charged with floating mode.
Specification:
Color: Yellow
Input Voltage: 190—230V
Output voltage: 6V/12V
Capacity: 6-80ah
Current peak: about 6A-8A for 6V,4-6A for 12V battery
Power:120W
Length Of Output Wire:80cm
Length Of Input Wire:120cm
Dimension: 19*14*7cm
Package Included:
1 X Battery Charger
1.There has strong fan,the speed can be 4500/min;
2.Stable performance,stopped automatic when charge full,pulse auto revive and maintenance battery;
3.Overheating protection:when the temperature of charger is over 105 ° C,the charger will stop working,when the temperature reduce to 80° C or turn off the power 10 minutes the charger can work again.Short circuit protection:when there has short circuit the charger stopped output and has a beep alert;
4.When the battery single cell voltage is lower than 1.5V the charger can’t start and has a beeb alert,avoid damage battery;
5.When the polarity of charger is adverse with battery,the charger will close automatic and has beeb alert.
Introduction of 5-stage mode
No-load mode: when there has no load connected with charger,the LED Screen will show voltage only,the power is about 2W.
Constant current: means the battery voltage is lower than the set voltage of charger,then the charger supply constant charging current to maintenance both battery and battery charger.
Constant Voltage: advanced pulse width modulation (PWM) technology,control the charger’s current and output voltage accurate,avoid overcharge.
Floating charge mode: when the battery is going to be charged full,the charger will stop charging,but still supply constant floating voltage and small current to battery.
Trickle charge mode: when the battery voltage and current is approaching the set voltage and current,it will turn to trickle floating charge from automatic mode,it means charge full,also can be charged with floating mode.
Specification:
Color: Yellow
Input Voltage: 190—230V
Output voltage: 6V/12V
Capacity: 6-80ah
Current peak: about 6A-8A for 6V,4-6A for 12V battery
Power:120W
Length Of Output Wire:80cm
Length Of Input Wire:120cm
Dimension: 19*14*7cm
Package Included:
1 X Battery Charger