Butane Gas Blow Torch Camping Iron Welding Soldering Fire Lighter Frame Guns

Material: ABS Flame Retardant Plastic Shell

Barrel Diameter: 19 mm

Size: 15 x 8.3 cm/5.9' x 3.27'

?�Durable and long lasting.

?�The temperature can reach 1300??

?�No gas blockage, no air leakage, ignition rate up to 99%, the appearance of work fine.

Welding Torch Assembly:

1.Turn the control knob to the 'CLOSE' position

2.When changing or reconnecting the gas cylinder, stay outdoors or away from others.

3.Adjust the gas cylinder collar slit to match the positioning label of the torch, and gently press it vertically and turn it to the right by 35 degrees.

4.Make sure there is no gas leakage. If there is gas leaking (by smelling it), immediately take it to outdoor ventilated places, find the flame and close the leak; if you want to check other leaks, please go to the outdoor ventilated place, use soapy water to detect Whether it is leaking. Must not use flame to detect.

5.Ignition (use an open flame to ignite): Turn the knob to 'open' place, then set fire to the flame.

1.Now it is ready to use. Adjust the flame size between 'OPEN' and 'CLOSE' as needed.

2.During the two-minute warm-up period, watch out for swaying flame; and the angle of the torch perpendicular to the ground should not exceed 15 degrees, otherwise the flame sway will occur.

3.After two minutes of warm-up, the torch can be use freely at any angle, keep the label facing up to reduce flame instability.

1.Confirm that the guns electronic ignition function is normal.

2.Connect the gas cylinder, turn on the valve, and hear if there is sound.

1.Turn the control knob to 'close' to turn off the gas.

2.After use, separate torch and gas cylinder.

1.Check if the torch is clean and dry.

2.Store the separate torch and gas cylinder in a cool, well-ventilated area, and cover it with the cover.

This product does not contain gas cylinders. 

1 x Flame Guns