Microscope Telescope Universal Interface Bracket Holder Adapter Mount for iPhone Samsung Smartphone
Tax included.
Description:
HY008 mobile phone interface is a fixed barcket of microscope & telescope connected to mobile phone.This interface can be fixed mobile phone easy to the microscope(
Features:
The special removable gluefixed,is compatible with any mobile phone.
Compatible with almost all microscope,telescope
Self centering,assembly and disassembly easily
With tripod interface,can be used as mobile phone camera bracket
Application range:
Outer diameter of eyepiece:27-42mm.Compatible with various microscope,telescope
Width of mobile phone: 40 - 100mm. Compatible with mobile phone in 6" and below.
Installation steps:
1.Put mobile phone on the bracket,make the lens aim to the hole in center,and then push the bottom of 3 Blue sliders from three directions,so be sure it can clamping mobile phone tightly.
Next,remove mobile phone,push the sliders inward 2 mm,and tighten the screws.Or adhesive the removable glue to the bracket,mobile phone within skin attached to the bracket,and the lens is aligned to the center of lens hole.
Removable surface of removable glue can be reused,wash the surface with water can recovery viscosity
2.Take the wedge sleeve on the outside of the eyepiece(notice the wedge sleeve direction.If the outer diameter of eyepiece is too small,have to fix the silicone rubber gasket firstly)
3.Take the bracket sleeve onto the wedge sleeve around 1/3,and then screw up clockwise by holding the eyepiece and silicone wedge sleeve.
4.Open the mobile phone camera,fix on the bracket,and then adjusting the height of bracket by pressing slowly downward,until the circular frame appearing on the mobile phone screen clearly.
Package includes:
1x Microscope and Telescope Mobile Phone Interface
1x Removable glue
More detail:
HY008 mobile phone interface is a fixed barcket of microscope & telescope connected to mobile phone.This interface can be fixed mobile phone easy to the microscope(
Features:
The special removable gluefixed,is compatible with any mobile phone.
Compatible with almost all microscope,telescope
Self centering,assembly and disassembly easily
With tripod interface,can be used as mobile phone camera bracket
Application range:
Outer diameter of eyepiece:27-42mm.Compatible with various microscope,telescope
Width of mobile phone: 40 - 100mm. Compatible with mobile phone in 6" and below.
Installation steps:
1.Put mobile phone on the bracket,make the lens aim to the hole in center,and then push the bottom of 3 Blue sliders from three directions,so be sure it can clamping mobile phone tightly.
Next,remove mobile phone,push the sliders inward 2 mm,and tighten the screws.Or adhesive the removable glue to the bracket,mobile phone within skin attached to the bracket,and the lens is aligned to the center of lens hole.
Removable surface of removable glue can be reused,wash the surface with water can recovery viscosity
2.Take the wedge sleeve on the outside of the eyepiece(notice the wedge sleeve direction.If the outer diameter of eyepiece is too small,have to fix the silicone rubber gasket firstly)
3.Take the bracket sleeve onto the wedge sleeve around 1/3,and then screw up clockwise by holding the eyepiece and silicone wedge sleeve.
4.Open the mobile phone camera,fix on the bracket,and then adjusting the height of bracket by pressing slowly downward,until the circular frame appearing on the mobile phone screen clearly.
Package includes:
1x Microscope and Telescope Mobile Phone Interface
1x Removable glue
More detail: